Service — Jackson, NJ
Foundation Crack Injection in Jackson, NJ
Overview
What this service covers
Foundation crack injection in Jackson, NJ fills and seals cracks in poured concrete foundation walls using epoxy or polyurethane resin injected under pressure. This approach repairs the crack from the interior — no excavation required. It applies to cracks that are stable (not actively widening or shifting) and need to be sealed against water intrusion. Not every crack is a candidate for injection. We assess crack type, width, and movement before any repair begins and will tell you clearly when injection is the wrong solution.
Photo by Karen Laårk Boshoff · Pexels
Free inspection
No obligation
Fixed price
Written before work starts
Transferable warranty
Stays with the home
Jackson, NJ based
Local, year-round service
Epoxy vs. polyurethane — which material is used and why
The two injection materials behave differently and suit different conditions.
Epoxy injection is rigid. It bonds both sides of the crack with a strength that can exceed the original concrete. It is appropriate for dry or slightly damp cracks where structural rebonding is the goal. Epoxy does not cure properly in the presence of active water, so it is not the right choice for a crack that is currently leaking.
Polyurethane foam injection is flexible and reacts with moisture to expand and fill the crack. It creates a waterproof seal even when the crack is actively wet at the time of repair. It is the correct material for leaking cracks and for situations where some future movement is expected — including freeze-thaw movement, which is common in New Jersey — since it will flex rather than crack again.
Most injections use ports spaced along the crack face and filled under controlled pressure to push material through the full depth of the wall.
Cracks that respond well to injection
- Narrow to medium-width vertical or slightly diagonal cracks in poured concrete walls
- Cracks that have remained stable — not widening or shifting over time
- Cracks allowing water entry with no signs of structural wall movement
- Walls showing no inward bowing or horizontal displacement
When crack injection will not hold
Horizontal cracks in basement walls indicate lateral soil pressure and often require structural repair — not injection. Wide or step-pattern cracks in concrete block walls typically cannot be effectively injected because block walls move differently than poured concrete. Cracks that have been injected before and reopened indicate ongoing movement; injection is a temporary fix in that situation.
If you are unsure whether a crack is stable, photograph it and mark both ends. Check again in four to six weeks. If it has grown or shifted, that indicates active movement that injection will not permanently resolve.
What affects the cost of crack injection
- Crack length and whether it extends through the full wall height
- Number of injection ports required along the crack face
- Material used — polyurethane typically costs more than epoxy
- Whether the crack is actively leaking at time of repair
- Whether additional drainage is needed alongside the crack repair
Common Questions
Frequently asked questions
Will crack injection stop water from coming in?
When performed correctly on a stable crack, yes. Polyurethane injection creates a waterproof seal through the full wall depth. Epoxy closes the crack so water has no path through. Both hold provided the crack is not experiencing ongoing movement from soil pressure or foundation settling.
Can an injected crack reopen?
It can, if the underlying cause has not been addressed or if the crack was still moving at the time of repair. Injection seals the crack but does not reduce the hydrostatic pressure or soil movement that caused it. In New Jersey, freeze-thaw cycles can reopen a rigid epoxy repair over time — polyurethane holds up better under that kind of repeated movement.
How long does crack injection take?
Most single-crack repairs take two to four hours — surface prep, port installation, injection, and cleanup. Multiple cracks are often handled in the same visit. There is a cure period before ports are removed, which varies by material and ambient temperature.
Does crack injection fix structural problems?
No. Injection seals water entry. It does not restore load-bearing capacity or address the drainage and soil conditions that caused the crack. Cracks showing signs of structural movement — horizontal cracking, inward bowing, or significant displacement — require structural assessment before any injection is performed.
Ready to get a free inspection?
We assess the problem, tell you what we find, and give you a fixed written quote — before any work begins.
Call (732) 344-4532Mon–Fri 7am–6pm · Sat 8am–2pm